Looking for answers to common questions about us or our products? See our FAQ here.This is a complete replacement steering kit for your 2007-2018 Jeep Wrangler JK. Speedway Motors - 1 1/2 Inch Per Foot Reamer( direct link) Mcmaster-Carr drill 5/8" bit #2933A28 ( direct link) Most half guards (Like the Warn Diff cover) can easily be modified to fit. Any aftermarket diff guards/covers may need to be modified or replaced depending on their standoff compared to the stock cover. This will ensure that you realize what is involved with this install, and the limitations of this setup. Please read the installation instrucions below BEFORE BUYING THIS PRODUCT. We recommend having this kit installed by a professional 4x4 shop in your area as drilling and reaming needs to be done to knuckles and pitman arm to fit the 1 ton tie rod ends. This kit will still allow you to easily align our steering setup. While we have had great luck not running a steering stabilizer, if you really have to have one feel free to order this bracket kit from summit racing. This eliminates the tie rod roll that an inverted T setup sometimes has. On this system the passenger side TRE dust boot is replaced with a polyurethane spacer, which pulls the body of the TRE against this knuckle. This means (unlike a threaded insert) the TRE has full thread engagement into the tube for the length of its threads. 25" wall threads are direct tapped into the tube. The rods are a beefy 1.25" diameter DOM, with an almost. Looking to upgrade your stock Jeep steering? Is your lifted Jeep having alignment problems? With our Jeep 1 ton steering upgrade, you eliminate the hard to adjust "Y" stock steering, it allows for a longer drag link to help with your steering angles, and most importantly gives you heavy duty steering that will take a beating and hold up to the off-road abuse.
0 kommentar(er)
